Aquajet ES (AES) Remco Power RV Aquajet Series, Variable Speed, 3.4 GPM, 65PSI, 12 Volt, On Demand, Ultimate Fresh Water Pump
Aquajet AES 12v pump
Processing...

Aquajet AES 12v pump

Code: D1002


$274.95

Subscribe and Save Up To 10%

Model: Aquajet AES
Flow: 3.5 gpm
Voltage: 12VDC
PSI: 65 psi (Variable Speed)
Amperage: 6.5 Amps
Primary Function: Replacement for Built In Water Pump

    Aquajet ES (AES) Remco Power RV Aquajet Series, Variable Speed, 3.4 GPM, 65PSI, 12 Volt, On Demand, Ultimate Fresh Water Pump

Product Description

Remco's Aquajet is the ultimate RV fresh water pumps with variable speed technology. The Aquajet puts out an 3.4GPM with 65 PSI on demand. With 12 volt variable speed technology the Aquajet give you "just like home" water supply by speeding up or slowing down based on your demand for water. The Aquajet can supply up to 4 independent faucets at once with out a noticeable drop in water pressure. The Aquajet also incorporates advanced safety features such as thermal protection that prevents over heating, low voltage protection which preserves battery life, and safety bypass that prevents over pressurizing. The ultimate choice for your camper, 5th Wheel, RV or off grid cabin is the Aquajet and its variable speed technology. The Aquajet is a USA made, certified ensuring safe and reliable operation. Dry camp with the feel of being hooked up to city water with the Remco Power RV Aquajet.

Aquatec variable speed pumps are offered in 3-chamber and 5-chamber models. RV Water Filter Store only offers the 5 chamber models. These pumps allow for constant pressure across multiple outlets via integrated electronic controls. Eliminates the need for pressurized tanks and pressure switches. Our patented 5-chamber diaphragm and piston design allows these pumps to operate at exceptionally quiet noise levels and with minimal pulsations.



Installation Instructions

Data Sheet

  • MOTOR: TYPE: 12 VDC, Permanent Magnet, Totally Enclosed, Non-Ventilated
  • LEADS: 14 AWG, 12” Long, Black Negative, Red Positive. TO AVOID PERMANENT ELECTRONIC DAMAGE, DO NOT REVERSE POLARITY.
  • TEMP. LIMITS: See Heat Rise Graph 
  • SPEED CONTROLLER: Factory Set to Approximately 6.5 Amps Max. Thermally Protected to Avoid Component Damage. Will Reset Automatically. CAUTION: Exterior Surfaces (heat sink), May Exceed 150°F After Only 15 Minutes of Operation. 
  • PUMP DESIGN: 5 Chamber Diaphragm Pump, Self Priming, Capable of Being Run Dry 
  • TYPICAL APPLICATION: Water Pressurization for RV and Marine 
  • MATERIALS:
    • PUMP HOUSINGS: Polypropylene
    • CONTROLLER HOUSING: Nylon
    • VALVES: EPDM
    • DIAPHRAGM: Santoprene
    • FASTENERS: Stainless Steel 
  • LIQUID TEMPERATURE: 140°F (60°C) Max. 
  • PUMP CERTIFICATIONS: IAPMO, NSF 
  • PRIMING CAPABILITIES: 10 Feet 

USAGE AND INSTALLATION HELP

For help with useage and installation, refer to the documentation in your shipment and the Product pages at www.RVWaterFilterStore.com 

 

RV WATER FILTER STORE SATISFACTION GUARANTEE

 If for any reason you're not fully satisfied with your order, no problem....things happen.... we understand.
Please contact us to discuss how we make this right for you or to get the Return Authorization Email with instructions.
 
Please DO NOT return products without contacting us first. We cannot guarantee that your package will get to the right place to give you the proper refund or product replacement you are looking for. 
 

SUPPORT

For technical issues, contact Dave at [email protected] or 602­-625-­1875.
For shipping or billing issues, contact Customer Service at [email protected] or 602­-625-­1875

    Aquatec variable speed pumps are offered in 3-chamber and 5-chamber models. RV Water Filter Store only offers the 5 chamber models. These pumps allow for constant pressure across multiple outlets via integrated electronic controls. Eliminates the need for pressurized tanks and pressure switches. Our patented 5-chamber diaphragm and piston design allows these pumps to operate at exceptionally quiet noise levels and with minimal pulsations.



    Installation Instructions

    Data Sheet

    • MOTOR: TYPE: 12 VDC, Permanent Magnet, Totally Enclosed, Non-Ventilated
    • LEADS: 14 AWG, 12” Long, Black Negative, Red Positive. TO AVOID PERMANENT ELECTRONIC DAMAGE, DO NOT REVERSE POLARITY.
    • TEMP. LIMITS: See Heat Rise Graph 
    • SPEED CONTROLLER: Factory Set to Approximately 6.5 Amps Max. Thermally Protected to Avoid Component Damage. Will Reset Automatically. CAUTION: Exterior Surfaces (heat sink), May Exceed 150°F After Only 15 Minutes of Operation. 
    • PUMP DESIGN: 5 Chamber Diaphragm Pump, Self Priming, Capable of Being Run Dry 
    • TYPICAL APPLICATION: Water Pressurization for RV and Marine 
    • MATERIALS:
      • PUMP HOUSINGS: Polypropylene
      • CONTROLLER HOUSING: Nylon
      • VALVES: EPDM
      • DIAPHRAGM: Santoprene
      • FASTENERS: Stainless Steel 
    • LIQUID TEMPERATURE: 140°F (60°C) Max. 
    • PUMP CERTIFICATIONS: IAPMO, NSF 
    • PRIMING CAPABILITIES: 10 Feet 

    USAGE AND INSTALLATION HELP

    For help with useage and installation, refer to the documentation in your shipment and the Product pages at www.RVWaterFilterStore.com 

     

    RV WATER FILTER STORE SATISFACTION GUARANTEE

     If for any reason you're not fully satisfied with your order, no problem....things happen.... we understand.
    Please contact us to discuss how we make this right for you or to get the Return Authorization Email with instructions.
     
    Please DO NOT return products without contacting us first. We cannot guarantee that your package will get to the right place to give you the proper refund or product replacement you are looking for. 
     

    SUPPORT

    For technical issues, contact Dave at [email protected] or 602­-625-­1875.
    For shipping or billing issues, contact Customer Service at [email protected] or 602­-625-­1875