RO Accessories

Automatic control including electronic solenoid and single tank float switch. Kit with instructions. [View Product Details]

Primary Function: Tank Level Control system with one Sensor to tell RO system to shut off or turn on

Automatic control including electronic solenoid and two tank float switches. Kit with instructions. [View Product Details]

Primary Function: Tank Level Control system with two sensors. One sensor to tell RO system to shut off and another to tell it when to turn on

Automatic control TLC unit only - No other parts or float switches. [View Product Details]

Primary Function: Tank Level Controller replacement

Aquatec 6800 12 VDC pressure-boost pump and switch [View Product Details]

Voltage: 12VDC

Aquatec 6800 RO Boost Pump 12 VDC version. Suitable for RO units with up to 75 GPD membranes and appropriate membrane restrictor. [View Product Details]

Voltage: 12VDC

Aquatec 6800 RO Boost Pump 24 VAC version without transformer. This would be a replacement for someone with this pump and does not need another transformer. [View Product Details]

Model: 6800 Boost Pump
Voltage: 24VAC
Primary Function: Boost Pump For RO Systems with single 75 GPD and Smaller Membranes.

Aquatec 8800 RO Boost Pump With 1/4" Ports Uses 24 VAC, without transformer This would be a replacement for someone with this pump and does not need another transformer. [View Product Details]

Voltage: 24VAC
Primary Function: Boost Pump for 75+ GPD and Dual Membrane RO systems

Aquatec 5800 RO Boost Pump With 3/8" Ports Uses 24 VAC with higher flow suitable for RO units with 75-200 GPD membranes and dual membranes hooked up in series or parallel. It is particularly helpful for the newer 200 GPD membranes used as a single or dual for more flow capacity to get the most gph. No transformer incl. [View Product Details]

Model: Aquatec 5800
Primary Function: Boost Pump for RO Systems with 200GPD membranes. Our Largest RO Pump

Aquatec 5800 RO Boost Pump With 3/8" Ports Uses 24 VAC with higher flow and includes a 120 VAC 4 amp transformer for use with standard power. Suitable for RO units with 75-200 GPD membranes and dual membranes hooked up in series or parallel. It is particularly helpful for the newer 200 GPD membranes used as a single or dual for more flow capacity to get the most gph. [View Product Details]

Model: Aquatec 5800
Primary Function: Boost Pressure and flow to the maximum for 75-200 gpd dual membrane systems.

Aquatec 550 Whole RV Boost Pump VSD 120 VAC, 50 PSI running pressure, use on in-coming water line to boost RV park water pressure [View Product Details]

Model: Aquatec 550 Boost Pump
Voltage: 120VAC
PSI: 60 PSI static, 50psi running
Primary Function: Boost Pump to increase poor pressure from the RV Park Water System