Aquatec Non VSD Replaces ShurFlo built-in pumps. Operates on 12 VDC power and consumes up to 11 amps. Produces 3.4 gpm. 60 psi pressure switch. 5 chambered just like VSD models. Should be used with accumulator tank.
Aquatec Non VSD Pump
Processing...

Aquatec Non VSD Pump

Code: D1003

$149.95

Model: Aquatec 550
Flow: 3.4 gpm
Voltage: 12VDC
PSI: 60 psi, Non Variable Speed
Amperage: 11 Amps
Primary Function: Replacement for Built In

Product Description

Aquatec Non VSD Replaces ShurFlo built-in pumps. Operates on 12 VDC power and consumes up to 11 amps. Produces 3.4 gpm. 60 PSI pressure switch. 5 chambered just like VSD models. Should be used with accumulator tank.

Aquatec variable speed pumps are offered in 3-chamber and 5-chamber models. RV Water Filter Store only offers the 5 chamber models. These pumps allow for constant pressure across multiple outlets via integrated electronic controls. Eliminates the need for pressurized tanks and pressure switches. Our patented 5-chamber diaphragm and piston design allows these pumps to operate at exceptionally quiet noise levels and with minimal pulsations.

Installation Instructions

Data Sheet

  • MOTOR: TYPE: 12 VDC, Permanent Magnet, Totally Enclosed, Non-Ventilated
  • LEADS: 14 AWG, 12” Long, Black Negative, Red Positive. TO AVOID PERMANENT ELECTRONIC DAMAGE, DO NOT REVERSE POLARITY.
  • TEMP. LIMITS: See Heat Rise Graph 
  • SPEED CONTROLLER: Factory Set to Approximately 6.5 Amps Max. Thermally Protected to Avoid Component Damage. Will Reset Automatically. CAUTION: Exterior Surfaces (heat sink), May Exceed 150°F After Only 15 Minutes of Operation. 
  • PUMP DESIGN: 5 Chamber Diaphragm Pump, Self Priming, Capable of Being Run Dry 
  • TYPICAL APPLICATION: Water Pressurization for RV and Marine 
  • MATERIALS:
    • PUMP HOUSINGS: Polypropylene
    • CONTROLLER HOUSING: Nylon
    • VALVES: EPDM
    • DIAPHRAGM: Santoprene
    • FASTENERS: Stainless Steel 
  • LIQUID TEMPERATURE: 140°F (60°C) Max. 
  • PUMP CERTIFICATIONS: IAPMO, NSF 
  • PRIMING CAPABILITIES: 10 Feet 

USAGE AND INSTALLATION HELP

For help with useage and installation, refer to the documentation in your shipment and the Product pages at www.RVWaterFilterStore.com 

 

RV WATER FILTER STORE SATISFACTION GUARANTEE

 If for any reason you're not fully satisfied with your order, no problem....things happen.... we understand.
Please contact us to discuss how we make this right for you or to get the Return Authorization Email with instructions.
 
Please DO NOT return products without contacting us first. We cannot guarantee that your package will get to the right place to give you the proper refund or product replacement you are looking for. 
 

SUPPORT

For technical issues, contact Dave at Dave@rvwaterfilterstore.com or 602­-625-­1875.
For shipping or billing issues, contact Tracey at Tracey@RVWaterFilterStore.com or 530­-919­9652

    Aquatec variable speed pumps are offered in 3-chamber and 5-chamber models. RV Water Filter Store only offers the 5 chamber models. These pumps allow for constant pressure across multiple outlets via integrated electronic controls. Eliminates the need for pressurized tanks and pressure switches. Our patented 5-chamber diaphragm and piston design allows these pumps to operate at exceptionally quiet noise levels and with minimal pulsations.

    Installation Instructions

    Data Sheet

    • MOTOR: TYPE: 12 VDC, Permanent Magnet, Totally Enclosed, Non-Ventilated
    • LEADS: 14 AWG, 12” Long, Black Negative, Red Positive. TO AVOID PERMANENT ELECTRONIC DAMAGE, DO NOT REVERSE POLARITY.
    • TEMP. LIMITS: See Heat Rise Graph 
    • SPEED CONTROLLER: Factory Set to Approximately 6.5 Amps Max. Thermally Protected to Avoid Component Damage. Will Reset Automatically. CAUTION: Exterior Surfaces (heat sink), May Exceed 150°F After Only 15 Minutes of Operation. 
    • PUMP DESIGN: 5 Chamber Diaphragm Pump, Self Priming, Capable of Being Run Dry 
    • TYPICAL APPLICATION: Water Pressurization for RV and Marine 
    • MATERIALS:
      • PUMP HOUSINGS: Polypropylene
      • CONTROLLER HOUSING: Nylon
      • VALVES: EPDM
      • DIAPHRAGM: Santoprene
      • FASTENERS: Stainless Steel 
    • LIQUID TEMPERATURE: 140°F (60°C) Max. 
    • PUMP CERTIFICATIONS: IAPMO, NSF 
    • PRIMING CAPABILITIES: 10 Feet 

    USAGE AND INSTALLATION HELP

    For help with useage and installation, refer to the documentation in your shipment and the Product pages at www.RVWaterFilterStore.com 

     

    RV WATER FILTER STORE SATISFACTION GUARANTEE

     If for any reason you're not fully satisfied with your order, no problem....things happen.... we understand.
    Please contact us to discuss how we make this right for you or to get the Return Authorization Email with instructions.
     
    Please DO NOT return products without contacting us first. We cannot guarantee that your package will get to the right place to give you the proper refund or product replacement you are looking for. 
     

    SUPPORT

    For technical issues, contact Dave at Dave@rvwaterfilterstore.com or 602­-625-­1875.
    For shipping or billing issues, contact Tracey at Tracey@RVWaterFilterStore.com or 530­-919­9652