|Low Pressure will Drive you Crazy - High Pressure will Burst your Pipes - What's a Person to Do?
One of the biggest complaints we hear from customers is that they don't have the right water pressure supplied to their RV. It's usually too low, and they can't get enough water to take a decent shower. Sometimes, it's too high, and they are afraid of bursting their plumbing. From our experience on the road, we know that you will encounter both types of problems, but there are very reliable ways of overcoming them. First, let's explore the problems in more detail.
Pressure or Flow - What's the Problem?
Many people don't understand the difference between pressure and flow, but you need to in order to solve your problem. "Flow" is a measure of volume of water delivered in a period of time. The poor shower is caused by low flow, as are most other RV water supply problems. "Pressure" is a measure of the force of the water, and it is measured when no water is flowing ("static" pressure). It is true that for a given plumbing system, the higher the pressure, the better the flow. However, there is a practical limit to increasing pressure to improve flow.
Don't Let Your Pressure Get Too High
RV plumbing systems are usually tested to a pressure of about 100 to125 pounds per square inch (psi), but to prevent warranty problems, RV manufacturers may recommend only 40-50 psi. Unfortunately, this may not provide the shower you're looking for. Most house plumbing operates at about 60psi, and this can be adequate for RVs, too. If your water supply pressure is approaching 100 psi, you are risking an expensive failure of your plumbing system. You should limit your pressure to 60-85 psi to be safe, and to do that, you can install a pressure regulator
Causes of Low Flow in RVs
Size matters, particularly in regard to water flow through pipes and orifices, and the bigger the better. Anything that reduces size in a plumbing system creates a restriction to flow. Restrictions can occur at any point in your RV from the park's valve to your kitchen sink or shower, and they are cumulative. Several modest restrictions in your plumbing system can drastically reduce the flow at the shower head. So, let's start at the beginning of your water supply line and look at causes of restriction and fixes available.
It Starts With The Hose
The hose you use to connect your RV to the water supply may be the first cause of flow restriction. Many RV water hoses are pretty cheap, and they are prone to kinking or collapsing. If your hose does that, you are suffering from a flow restriction. The solution here is to use a better hose that resists deformation.
Pressure Regulators Also Cut Flow
We talked about pressure regulators earlier and think they are a wise investment. However, while protecting you from excess pressure, they may be seriously reducing your flow. Like many plumbing fittings, regulators inherently restrict flow, but some are worse than others. Generally speaking, the more expensive regulators can accommodate a much greater flow of water than the cheap ones. We sell a complete line of pressure regulators including industrial-strength, high-flow, adjustable units.
Filters Can Reduce Flow Significantly
Filters work by forcing water through very small orifices to strain out the contaminants. Fortunately, there are a huge number of "holes" in a filter, and the bigger the filter unit, the more "holes" it has, and the better the flow. So, to achieve better flow through a filter, use a bigger filter that has more filtration area. A small, in line filter restricts flow more than a 10-inch standard canister , and the standard canister is more restrictive than a jumbo canister . So, if you are using filtration on all of the water used in your RV, you will want to go with the largest filtration system that will fit your needs to avoid flow restrictions. Another factor to consider with filters is that as they get plugged with contaminants, their flow rate decreases. If you find your flow rate dropping when you are using filters, it may be time to clean or replace them.
The clear canister to the right is a good example of a plugged filter, it's a wonder these folks are getting any flow at all.
Conversely, if you never notice a decrease in flow, you'd better check to see if your filter is working!
Internal Plumbing Systems may Be Inadequate
Manufacturers will scrimp on anything and everything to cut costs, and this includes the plumbing system. Undersize pipe and restrictive fittings can contribute to the low-flow problems you experience. If you check the flow in a brand new RV that is hooked up to a municipal water system, everything may look good. But, if you take this same rig out to an RV park and hook up a pressure regulator and a filter, it may suffer. Unfortunately, there is not much you can reasonably do to improve an RV's plumbing.
Fixtures Can Also Seriously Reduce Flow
Your plumbing fixtures are the final place that flow restrictions can occur. Sink faucets and shower valves often have very small orifices that seriously limit the amount of water that can pass through them. Sometimes, these restrictions are removable, and are included to meet Federal water consumption standards. In any case, you can find better-flowing fixtures by carefully shopping around.