5 micron spun polypropylene sediment filters. 2 per package.
RV-SED5 cartridge, 10", 2-pk
Processing...

RV-SED5 cartridge, 10", 2-pk

Code: A1102

$5.95

Model: RV SED5
Flow: 3-4 gpm
Microns: 5 Microns
Life: 3-4 months
Material: Spun Polypropylene
Primary Function: Removes Sediment 5 micron and larger

Product Description

5 micron spun polypropylene sediment filters. Two per package

This is a 5 micron disposable sediment filter, which means that it will "nominally" filter objects in the water that are 5 microns or more.

A micron is 1 millionth of a meter or 1 thousanth of a millimeter. Nominally means that 5 microns is a nominal value, and the filter may remove objects smaller or let objects larger than 5 microns through

Sediment filters should be the first filter that the water comes in contact with in a multifilter system so that it can remove sediment from the water before getting to the more expensive carbon filters or resin filters.

Features and Benefits


The Hytrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE's patented melt blown microfiber technology, Hytrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Hytrex true-graded density filter matrix (lower density at the surface of the filter with progressively higher density toward the center) captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string wound or resin-bonded filters.

Hytrex contains no wetting agents, solvents, antistatic agents or binders, and meets the requirements of the FDA for food and beverage contact. The filter incinerates to trace ash for easy disposal.

Applications

  • Potable water filtration
  • Chemical filtration - wide chemical compatibility
  • Plating baths
  • Amine filtration
  • Meets FDA compliance for food and beverage contact

Materials of Construction

  • Filtration Media : Polypropylene
  • End caps and Adapters : Polypropylene

Dimensions

  • Nominal O.D. - 2.50" (6.4 cm)
  • Nominal I.D. -1" (2.5 cm)
  • Length - 9-7/8"

Additional Information 


Hytrex Depth cartridge filters are made from thermally bonded fibers of polypropylene. GE certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges, and that the resin used for manufacturing the filter media meets the food contact requirements of the U.S. FDA 21 CFR regulations. When required, specify only FDA complain sealing materials and end adapters. GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.

USAGE AND INSTALLATION HELP

For help with useage and installation, refer to the documentation in your shipment and the Product pages at www.RVWaterFilterStore.com 

 

RV WATER FILTER STORE SATISFACTION GUARANTEE

 If for any reason you're not fully satisfied with your order, no problem....things happen.... we understand.
Please contact us to discuss how we make this right for you or to get the Return Authorization Email with instructions.
 
Please DO NOT return products without contacting us first. We cannot guarantee that your package will get to the right place to give you the proper refund or product replacement you are looking for. 
 

SUPPORT

For technical issues, contact Dave at Dave@rvwaterfilterstore.com or 602­-625-­1875.
For shipping or billing issues, contact Tracey at Tracey@RVWaterFilterStore.com or 530­-919­9652

    This is a 5 micron disposable sediment filter, which means that it will "nominally" filter objects in the water that are 5 microns or more.

    A micron is 1 millionth of a meter or 1 thousanth of a millimeter. Nominally means that 5 microns is a nominal value, and the filter may remove objects smaller or let objects larger than 5 microns through

    Sediment filters should be the first filter that the water comes in contact with in a multifilter system so that it can remove sediment from the water before getting to the more expensive carbon filters or resin filters.

    Features and Benefits


    The Hytrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE's patented melt blown microfiber technology, Hytrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Hytrex true-graded density filter matrix (lower density at the surface of the filter with progressively higher density toward the center) captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string wound or resin-bonded filters.

    Hytrex contains no wetting agents, solvents, antistatic agents or binders, and meets the requirements of the FDA for food and beverage contact. The filter incinerates to trace ash for easy disposal.

    Applications

    • Potable water filtration
    • Chemical filtration - wide chemical compatibility
    • Plating baths
    • Amine filtration
    • Meets FDA compliance for food and beverage contact

    Materials of Construction

    • Filtration Media : Polypropylene
    • End caps and Adapters : Polypropylene

    Dimensions

    • Nominal O.D. - 2.50" (6.4 cm)
    • Nominal I.D. -1" (2.5 cm)
    • Length - 9-7/8"

    Additional Information 


    Hytrex Depth cartridge filters are made from thermally bonded fibers of polypropylene. GE certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges, and that the resin used for manufacturing the filter media meets the food contact requirements of the U.S. FDA 21 CFR regulations. When required, specify only FDA complain sealing materials and end adapters. GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.

    USAGE AND INSTALLATION HELP

    For help with useage and installation, refer to the documentation in your shipment and the Product pages at www.RVWaterFilterStore.com 

     

    RV WATER FILTER STORE SATISFACTION GUARANTEE

     If for any reason you're not fully satisfied with your order, no problem....things happen.... we understand.
    Please contact us to discuss how we make this right for you or to get the Return Authorization Email with instructions.
     
    Please DO NOT return products without contacting us first. We cannot guarantee that your package will get to the right place to give you the proper refund or product replacement you are looking for. 
     

    SUPPORT

    For technical issues, contact Dave at Dave@rvwaterfilterstore.com or 602­-625-­1875.
    For shipping or billing issues, contact Tracey at Tracey@RVWaterFilterStore.com or 530­-919­9652