

RV-SED5 cartridge, 10", 2-pk

Subscribe and Save Up To 10%
- Important Information
Product Description
- About This Product
- Specs & Details
- Related Products & Accessories
- Service & Support
- Reviews
This is a 5 micron disposable sediment filter, which means that it will "nominally" filter objects in the water that are 5 microns or more.
A micron is 1 millionth of a meter or 1 thousanth of a millimeter. Nominally means that 5 microns is a nominal value, and the filter may remove objects smaller or let objects larger than 5 microns through
Sediment filters should be the first filter that the water comes in contact with in a multifilter system so that it can remove sediment from the water before getting to the more expensive carbon filters or resin filters.
Features and Benefits
The Hytrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE's patented melt blown microfiber technology, Hytrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Hytrex true-graded density filter matrix (lower density at the surface of the filter with progressively higher density toward the center) captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string wound or resin-bonded filters.
Hytrex contains no wetting agents, solvents, antistatic agents or binders, and meets the requirements of the FDA for food and beverage contact. The filter incinerates to trace ash for easy disposal.
Applications
- Potable water filtration
- Chemical filtration - wide chemical compatibility
- Plating baths
- Amine filtration
- Meets FDA compliance for food and beverage contact
Materials of Construction
- Filtration Media : Polypropylene
- End caps and Adapters : Polypropylene
Dimensions
- Nominal O.D. - 2.50" (6.4 cm)
- Nominal I.D. -1" (2.5 cm)
- Length - 9-7/8"
Additional Information
Hytrex Depth cartridge filters are made from thermally bonded fibers of polypropylene. GE certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges, and that the resin used for manufacturing the filter media meets the food contact requirements of the U.S. FDA 21 CFR regulations. When required, specify only FDA complain sealing materials and end adapters. GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.
USAGE AND INSTALLATION HELP
For help with useage and
RV WATER FILTER STORE SATISFACTION GUARANTEE
SUPPORT
- About This Product
- Specs & Details
- Potable water filtration
- Chemical filtration - wide chemical compatibility
- Plating baths
- Amine filtration
- Meets FDA compliance for food and beverage contact
- Filtration Media : Polypropylene
- End caps and Adapters : Polypropylene
- Nominal O.D. - 2.50" (6.4 cm)
- Nominal I.D. -1" (2.5 cm)
- Length - 9-7/8"
- Related Products & Accessories
- Service & Support
- Reviews
This is a 5 micron disposable sediment filter, which means that it will "nominally" filter objects in the water that are 5 microns or more.
A micron is 1 millionth of a meter or 1 thousanth of a millimeter. Nominally means that 5 microns is a nominal value, and the filter may remove objects smaller or let objects larger than 5 microns through
Sediment filters should be the first filter that the water comes in contact with in a multifilter system so that it can remove sediment from the water before getting to the more expensive carbon filters or resin filters.
Features and Benefits
The Hytrex depth filter is an exceptional value for general applications where long life, high purity and low change-out frequency are required. Produced through GE's patented melt blown microfiber technology, Hytrex is a 100% pure polypropylene depth filter with exceptional dirt-holding capacity. Hytrex true-graded density filter matrix (lower density at the surface of the filter with progressively higher density toward the center) captures particles throughout the entire filter depth. This translates to longer life and fewer change-outs than existing string wound or resin-bonded filters.
Hytrex contains no wetting agents, solvents, antistatic agents or binders, and meets the requirements of the FDA for food and beverage contact. The filter incinerates to trace ash for easy disposal.
Applications
Materials of Construction
Dimensions
Additional Information
Hytrex Depth cartridge filters are made from thermally bonded fibers of polypropylene. GE certifies that it uses no resin binders, lubricants, antistatic or release agents or other additives in the manufacture of these cartridges, and that the resin used for manufacturing the filter media meets the food contact requirements of the U.S. FDA 21 CFR regulations. When required, specify only FDA complain sealing materials and end adapters. GE filter cartridges are designed and manufactured for resistance to a wide range of chemical solutions. Conditions will vary with each application and users should carefully verify chemical compatibility. Please contact your GE distributor for more information.
USAGE AND INSTALLATION HELP
For help with useage and